Spara upp till 70% på "

Bil & MC

"
DE BÄSTA ERBJUDANDEN
JeffTron Active Brake - V2
JeffTron Active Brake - V2

Professionally made active brake designed for airsoft electric guns (AEG). Device increases gun rate of fire and battery holds longer, than with basic wiring. In semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF). Active break solves multiple shots in semi mode with weapons with very high rate of fire (ROF). It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard. SPECIFICATIONS: Active brake build on trigger contacts from SHS company Easy installation inside the gearbox version 2 Devices without wires, you can use max. 1,5qmm (AWG16) power wires and 0,5qmm (AWG20) signal wires Suitable for service center, if you are not familiar with soldering to the circuit board, choose device with wiring and accessories. Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Active brake II (it is outside gearbox) Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) No current consumption in the idle mode No sparking on switch contacts Active braking uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor In auto fire mode piston stops in random position due the mechabox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

Läs mer
JeffTron Active Brake - V2 med Kablage
JeffTron Active Brake - V2 med Kablage

Professionally made mosfet with motor active braking designed for airsoft electric guns (AEG). In semi fire mode piston isn't partially stretched, spring is fully released, parts in mechabox aren't under strain and nozzle locks hop-up chamber in greater part (depends on ROF). Active break solves multiple shots in semi mode with weapons with very high rate of fire (ROF). Device increases gun rate of fire and battery holds longer, than with basic wiring. - Very small device dimension, it fits nearly everywhere - Presoldered wires allows faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in package) There are high quality power wires 1,5 qmm (AWG16) with thin and hard MPPE insulation and signal blue wire 0.34 qmm (AWG22) with MPPE insulation Board covered by conformal coating, it protect device against water If you want to use your own wires, choose variant without wiring Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s) Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) Active braking uses the excess energy from the motor to stop it. The braking effect is the most powerful with high torgue motor 6 wires connection Device size 27x10x7mm No current consumption in the idle mode No sparking on switch contacts In auto fire mode piston stops in random position due the mechabox design For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

Läs mer
Savotta 1-Mag Pouch - TRG M10 (Färg: Multicam)
Savotta 1-Mag Pouch - TRG M10 (Färg: Multicam)

Magazine pouch for one Sako TRG M10 magazine. Tuck tab and hook-and-loop lid closure, PALS and belt compatible attachment system. Fits one Sako TRG M10 magazine Also fits magazines of similar size/shape (AICS 10rd 308, SVD, HK 417 10rd etc. Protective lid with tuck tab and hook-and-loop closure Built-in hook-and-loop "silencer" in the lid PALS and belt compatible attachment system Double layered 500D Cordura construction Water drainage grommet on the bottom All colour options offer good NIR performance 5 year material and workmanship warranty Made in Finland/Estonia Our lidded magazine pouches are designed to dependably carry your magazines well protected in any conditions and to be easily opened even with thick winter gloves on. The lid keeps the worst mud,sand and snow out of the pouch. Fits a bunch of similar size/shape magazines, including: AICS 10 round .308, SVD and HK417 10 round. The rear features our standard PALS attachment webbing system with tuck tabs. The attachment straps can also be woven into belt loops for 45-50 mm wide belts. The whole pouch is made from double layered 500D Cordura for shape retention and abrasion resistance. At the very bottom is a drainage grommet to let water out. Lid closure system - The lid on this pouch is closed using a polyethylene reinforced tuck tab and hook-and-loop. A tuck tab is mechanically very simple, but extremely reliable compared to plastic buckles, press studs or just using hook.

Läs mer