HP Regulator 4500 psi Ninja PRO V3 Aluminum SLP, black / red SLP in the name of this Pro V3 stands for Super Low Pressure. The output pressure is fixed at 300 Psi and not suitable for every marker. It is best to find out beforehand whether your marker works with an output pressure of 300 Psi. With over 20 years of experience, Ninja Paintball is the leader in developing innovative and high quality paintball regulators. The Pro V3 is no exception and sets new standards. The main feature is the newly developed pin-valve, which allows the highest airflow of all regulators manufactured by Ninja so far. Increased airflow, also referred to as "flow", results in less velocity fluctuation and more consitancy. The Bonnet (the top element with threads) has also been redesigned. Unlike previous Pro V models, the thread on the V3 is a separate component that is responsible for the rotation of the regulator. By being able to rotate the thread, you can adjust where the fill nipple and pressure gauge " sits" on the fully installed regulator with millimeter precision. This prevents the two components from pressing into the hand when holding the marker, regardless of the thread and the size of the hand. To do this, once the HP system is fully discharged, simply loosen three locking screws and the HP system can then be adjusted accordingly on the marker. Instead of having to replace the entire bonnet in the event of damage, it is now possible to replace just that part. This is more sustainable and cost effective. In addition, it is possible to replace the aluminum thread with a stainless steel thread. The new OFV filling nipple is also worth mentioning. Instead of Teflon tape for sealing, a robust O-ring is used now. It simplifies cleaning and maintenance, as the O-ring can be quickly cleaned or replaced. In addition, this provides a cleaner appearance as there is no longer any ugly protrusion of Teflon tape. Topping off all this, the Pro V3 comes with a large set of spare parts. It includes various gaskets, small parts, screws and even a matching Allen wrench. Super Low Pressure Regulator with fixed 300 Psi output pressure 360° rotable when depressurized Newly designed bonnet with interchangeable thread Newly developed Pin-Valve with highest flow of all Ninja Regs so far Generous spare parts kit with gaskets, small parts, screws and hex key High quality and precise workmanship
Läs merSNIPER BOLT ACTION RIFLE. REINFORCED POLYMER BODY METAL OUTER BARREL AND UPPER RECEIVER POLYMER STOCK WITH ADJUSTABLE CHEEK PAD AND BUTT PAD FOLDABLE, ADJUSTABLE AND REMOVABLE METAL BIPOD 30 ROUNDS LOW-CAP METAL MAGAZINE REMOVABLE 3" 3x STANDARD 21mm RAILS SET UNDER BARREL 2,25" STANDARD 21mm RAIL MELAL SLING MOUNTS CARRYING SLING INCLUDED
Läs merThe N.K.2 is a small knife that expands the Extrema Ratio family of neck knives. It differs from the N.K.1 model in terms of blade size and blood-drain milling. The handle's ergonomics are designed to prevent accidental cuts during extraction from the sheath. A notch is made on the back for positioning the thumb or index finger depending on use. The knife's structure allows for very effective cutting as well as small precision work. The Kydex sheath is quick-release and comes with a paracord for use as a neck knife. It can also be attached to the MOLLE system.
Läs merHP Regulator 4500 psi Ninja PRO V3 Aluminum SHP, black / red The Ninja Pro V3 SHP was designed specifically for the Tippmann markers running RTs and Cyclone Feeds as well as Automags. SHP stands for Super High Pressure and it ships at a fixed output pressure of around 1100psi and is ideal to unleash the full potential of markers like the automag. With over 20 years of experience, Ninja Paintball is the leader in developing innovative and high quality paintball regulators. The Pro V3 is no exception and sets new standards. The main feature is the newly developed pin-valve, which allows the highest airflow of all regulators manufactured by Ninja so far. Increased airflow, also referred to as "flow", results in less velocity fluctuation and more consitancy. The Bonnet (the top element with threads) has also been redesigned. Unlike previous Pro V models, the thread on the V3 is a separate component that is responsible for the rotation of the regulator. By being able to rotate the thread, you can adjust where the fill nipple and pressure gauge " sits" on the fully installed regulator with millimeter precision. This prevents the two components from pressing into the hand when holding the marker, regardless of the thread and the size of the hand. To do this, once the HP system is fully discharged, simply loosen three locking screws and the HP system can then be adjusted accordingly on the marker. Instead of having to replace the entire bonnet in the event of damage, it is now possible to replace just that part. This is more sustainable and cost effective. In addition, it is possible to replace the aluminum thread with a stainless steel thread. The new OFV filling nipple is also worth mentioning. Instead of Teflon tape for sealing, a robust O-ring is used now. It simplifies cleaning and maintenance, as the O-ring can be quickly cleaned or replaced. In addition, this provides a cleaner appearance as there is no longer any ugly protrusion of Teflon tape. Topping off all this, the Pro V3 comes with a large set of spare parts. It includes various gaskets, small parts, screws and even a matching Allen wrench. Super High Pressure Regulator with around 1100 Psi fixed output pressure 360° rotable when depressurized Newly designed bonnet with interchangeable thread Newly developed Pin-Valve with highest flow of all Ninja Regs so far Generous spare parts kit with gaskets, small parts, screws and hex key High quality and precise workmanship
Läs merGodkända handfängsel av samma modell som används av Svenska kriminalvården och Svenska Polisen. RPS godkända - 40% lättare jämfört med standardmodell. 23 låspositioner Dubbel låsmekanism Levereras med 2st nycklar
Läs merType 4000 offers a lot of storage space in a compact design. The case is ideal for camera equipment, measuring/testing equipment, night vision/optic, or a great range case for the recreational shooter. Removable pre-cut foam insert (PnP) in the bottom Convoluted foam in the lid Case shell made of polypropylene (PP) Certified with the STANAG 4280, DEF STAN 81-41 and ATA 300 standards Automatic air pressure compensation valve Strong, dustproof, waterproof (IP67 certified) Temperature resistant from -30° up to +80° C Rubberized handle Stackable Two eyelets for padlocks (Ø 0.3 inch) 30 year warranty Removable lid (optional) Optional accessories: carrying strap (item no. CS/3000), lid pocket (item no. LP/4000), mesh bag (item no. MB/4000) and panel frame (item no. PF/4000) possible
Läs merVar redo för allt med vår multifärgs-ficklampa PSR51 paketerad tillsammans med ett universalt vapenfäste och fjärrkontroll. Den tysta tryckknappen är optimal för högrisksituationer och ger dig full kontroll utan att du behöver ta händerna från ditt vapen. Hunting Kit: GP Design PSR51, universalt vapenfäste AGM01 & fjärrkontroll ARS01 Tyst tryckknapp Laddningsbar ficklampa Bärbar väska som skyddar din utrustning
Läs merN.K.1 is a reduced-size knife is based on the SKINNER (which comes with our CULTER VENATORIUS hunting knife) and perfected to a true tactical knife. The design of the handle prevents accidental injury while drawing. A groove on the back of the blade accommodates for the user’s index finger or thumb, according to wielding style. Due to its overall construction, the N.K.1 is both capable of offense, through very effective slashing strikes, and useful for minute precision work. The included, rapid- release Kydex sheath comes with a paracord strip for neck carry. Further, it can be attached via MOLLE system to tactical vests or to any of the compatible cordura sheaths from Extrema Ratio. Available but not included: BELT-CLIP (for attaching sheath to a belt), polymer UNDER SHIRT SYSTEM (for concealed carry).
Läs mer