The working pressure of the regulator is 300 bar (suitable for all 300 bar HP bottles), the output pressure in the marker reaches 850 PSI (about 55 bar) and is ideal for almost all marker models and use with remote systems , Features of the Maxtact 360 degree HP regulator - Working pressure 300 bar / 4500 PSI - Output pressure 55 bar / 850 PSI - 360 degree infinitely adjustable thread (also in assembled condition) - High quality workmanship and durable materials - Ideal for MagFed setups. The working pressure of the regulator is 300 bar (suitable for all 300 bar HP bottles), the output pressure in the marker reaches 850 PSI (about 55 bar) and is ideal for almost all marker models and use with remote systems , Features of the Maxtact 360 degree HP regulator - Working pressure 300 bar / 4500 PSI - Output pressure 55 bar / 850 PSI - 360 degree infinitely adjustable thread (also in assembled condition) - High quality workmanship and durable materials - Ideal for MagFed setups.
Läs merJCS foam rockets are designed especially for JCS launchers and have not been tested in any other launcher. Recommended to launch JCS foam rockets at 180 fps (feet per second) maximum velocity or less. A 180 fps velocity, or less, provides maximum range and life of the foam rocket. JCS foam rockets load easily when powdered with a baby power Tests by JCS have shown that F-69 rockets will fly up to 50% farther than NERF rockets
Läs merJCS foam rockets are designed especially for JCS launchers and have not been tested in any other launcher. Recommended to launch JCS foam rockets at 180 fps (feet per second) maximum velocity or less. A 180 fps velocity, or less, provides maximum range and life of the foam rocket. JCS foam rockets load easily when powdered with a baby power Tests by JCS have shown that F-69 rockets will fly up to 50% farther than NERF rockets
Läs merSwiss arms perfectly fits the stereotype we all have of things swiss, as precision and quality are the company’s fundamental values. All of the company’s products were designed to optimize performance, as is the case for all attachments. Today, Swiss arms is often considered as the company with the highest performing guns and the widest range of accessories on the market.
Läs merDet senaste tillskottet i Lanskys serie SHARP. D-Sharp har fyra slipvinklar (17º, 20º, 25º och 30º) i 600 grit diamant. Det finns även en 800 grit keramisk slipsten som kan användas för att polera raka eller tandade blad. Perfekt som tillbehör eller som ett fristående slipsystem. 4 slipvinklar (17º, 20º, 25º, and 30º) Keramisk slipsten 600 grit medium diamant 800 grit keramisk slipsten Slittålig metallåda 100% kompatibel med alla Turn Boxes och system med kontrollerade slipvinklar från Lansky
Läs merSätt på dig denna 5.11® Ts och svep in dig i ringspunnen bomull med andningsförmåga som har sol och åldersbeständigt tryck. In den får du komfort, passform och utseende som håller. 90 % bomull/10 % polyester kammad ringspunnen, 4,3 oz
Läs merHP Regulator 4500 psi Ninja PRO V3 Aluminum, black / red With over 20 years of experience, Ninja Paintball is the leader in developing innovative and high quality paintball regulators. The Pro V3 is no exception and sets new standards. The main feature is the newly developed pin-valve, which allows the highest airflow of all regulators manufactured by Ninja so far. Increased airflow, also referred to as "flow", results in less velocity fluctuation and more consitancy. The Bonnet (the top element with threads) has also been redesigned. Unlike previous Pro V models, the thread on the V3 is a separate component that is responsible for the rotation of the regulator. By being able to rotate the thread, you can adjust where the fill nipple and pressure gauge " sits" on the fully installed regulator with millimeter precision. This prevents the two components from pressing into the hand when holding the marker, regardless of the thread and the size of the hand. To do this, once the HP system is fully discharged, simply loosen three locking screws and the HP system can then be adjusted accordingly on the marker. Instead of having to replace the entire bonnet in the event of damage, it is now possible to replace just that part. This is more sustainable and cost effective. In addition, it is possible to replace the aluminum thread with a stainless steel thread. The new OFV filling nipple is also worth mentioning. Instead of Teflon tape for sealing, a robust O-ring is used now. It simplifies cleaning and maintenance, as the O-ring can be quickly cleaned or replaced. In addition, this provides a cleaner appearance as there is no longer any ugly protrusion of Teflon tape. In addition to the 360° rotation, the Pro V3 can be adjusted in operating pressure just like any other Ninja regulator. To do this, the regulator must be opened and the silver or bluish-silver shims have to be removed. This allows the operating pressure to be changed from about 550 to 750 psi. So you can adjust the regulator to fit the PSI recommendations of the marker manufacturer. Topping off all this, the Pro V3 comes with a large set of spare parts. It includes various gaskets, small parts, screws and even a matching Allen wrench. 360° rotable when depressurized Newly designed bonnet with interchangeable thread Newly developed Pin-Valve with highest flow of all Ninja Regs so far Generous spare parts kit with gaskets, small parts, screws and hex key Adjustable output pressure High quality and precise workmanship
Läs merLevereras med en Dye UL Regulator från Dye Paintball. Regulatorn är justerbar mellan 800 till 450psi uttryck. Dye har tagit småtankar till nästa nivå. 4500PSI! Nu kan du få plats med din högtryckstank närstan vart som hällst. Med sin storlek på endast 50x200mm så kommer den passa i de paintballmarkörer som har tanken plaserad i stocken. Den är endast 15mm längre än de tankar som är vanligast att använda i dagsläget (13ci). Den har en volym som är 0.25L vilket skulle motsvara ca 15.5 ci. Tanken klarar 4500PSI / 300Bar vilket kommer göra att du kan få ut fler magasin och spela längre på en tank. Tanken är dessutom extremt lätt på endast 285g. Även fast tanken är liten och lätt är hållbarheten inget att oroa sig för. Den har samma pålitliga konstruktion med en Stålkärna som förstärks med komposit som alla andra tankar i Dyes Core serie. Tanken är självkart PI (π) märkt. Egenskaper: 0.25L 285g Diameter 50 mm Length 200 mm Stainless Steel core Air stock suitable Levereras med en 4500psi Proto regulator
Läs merNinja's Microbore remote lines are 30% lighter than traditional remotes. These extremely flexible lines are easier to use and work through your gear than traditonal remotes. All Microbore lines have a working pressure of 4500 psi and can be used with any standard paintball CO2 or Nitrogen (Compressed Air) tank. Includes a standard Quick Disconnect Fitting. MADE IN THE USA
Läs merThe One-Zero XR knife boasts sleek and confident design, but it's not just about looks. Its super strong XR Lock ensures a smooth and dependable lock-up of the blade, which is made of polished TiNi coated CRYO CPM S35VN steel. The handle is crafted from sculpted aircraft-grade aluminum and features hidden fasteners for a seamless appearance. MADE FOR THOSE THAT DEMAND QUALITY AND PRECISION - An S35VN steel blade, sculpted aircraft-grade aluminum handles with hidden fasteners, and SOG's industry-leading XR lock mechanism combine to create a knife designed to exceed expectations A SUBLIME AND POWERFUL DAILY CARRY - One-Zero XR occupies a leadership role in SOG’s incredible selection of daily carry folding knives EXTRAORDINARY EVERDAY CARRY - Blending premium materials with precise design, One-Zero XR is a sleek, sophisticated folding knife delivering confidence in a detailed and powerful package CRYO CPM S35VN STEEL - A tough and corrosion-resistant steel that is cryogenically heat-treated to SOG’s unique performance specifications. The black TiNi finished CPM S35VN blade provides the ideal combination of sharpness and toughness of edge for heavy use with minimal maintenance XR LOCK - Reliable and powerful, able to withstand up to 1,500 pounds of force, provides the ultimate built-in blade locking security when open and ensures it only opens when intended ALUMINUM HANDLE - The sculpted aircraft-grade aluminum handle features an elegant and beautiful hidden fastener design
Läs mer200 bar Tactical HP system for all Air Stock systems with individually adjustable Maxtact 200 Bar Regultor. The high-quality aluminum bottle has a filling volume of 0.2 liters / 13ci and can be filled with up to 200 bar / 3000 PSI working pressure. As a regulator, the very compact and individually adjustable Maxtaxt 360 degrees Reg was chosen. The perfect combination for all MagFed Paintball markers with Air Stock shoulder rest. Product details: - 200 bar / 3000 PSI HP system - 0.2 L / 13ci filling volume - High quality Maxtact 360 degrees Reg - Optiomal suitable for MagFed Air Stocks.
Läs mer