Ett litet Nimh batteri på 7.2V 500mAh. Batteriet passar flera olika eldrivna airsoftpistoler som tex nedanstående modeller Ref. 15919 G18C Ref. 16492 CZ99. Ref. 17508 STI Classic. A NiMH battery offers you a hassle free, reliable and robust power source. They offer a flatter discharge rate, than traditional batteries, Providing a stable rate of fire during their use. Other advantages of NiMH batteries are, that they don’t need to be completely discharged before charging. And they can be rapidly charged in as little as one hour. It is recommended that the battery, be fully discharged once in a while to keep the battery at peak performance.
The N.K.2 is a small knife that expands the Extrema Ratio family of neck knives. It differs from the N.K.1 model in terms of blade size and blood-drain milling. The handle's ergonomics are designed to prevent accidental cuts during extraction from the sheath. A notch is made on the back for positioning the thumb or index finger depending on use. The knife's structure allows for very effective cutting as well as small precision work. The Kydex sheath is quick-release and comes with a paracord for use as a neck knife. It can also be attached to the MOLLE system.
With more than three times the reach of ordinary USB 3.x cables, Logitech Strong USB lets you separate self-powered USB 2.0 and 3.x peripherals and a host PC by up to 25 metres (84 ft). The aramid-reinforced active optical cable is plenum rated and Eca certified for safe operation and reliable performance to 10 Gbps. By eliminating the need for USB extenders, Logitech Strong USB eliminates points of failure while reducing cost and complexity. Unlike typical USB cables that can break during or after installation, Logitech Strong USB can be pulled through walls, above ceilings and within standard ¾” conduit.\n\n
The N.K.3 is a small knife that expands the Extrema Ratio family of neck knives. It differs from the N.K.1 and N.K.2 models due to its larger blade size, which measures up to 70mm and is equipped with blood-scalding milling. The handle's ergonomics are designed to prevent accidental cuts during extraction from the sheath. A notch is made on the back for positioning the thumb or index finger depending on use. The knife's structure allows for very effective cutting as well as small precision work. The Kydex sheath is quick-release and comes with a paracord for use as a neck knife. It can also be attached to the MOLLE system.
N.K.1 is a reduced-size knife is based on the SKINNER (which comes with our CULTER VENATORIUS hunting knife) and perfected to a true tactical knife. The design of the handle prevents accidental injury while drawing. A groove on the back of the blade accommodates for the user’s index finger or thumb, according to wielding style. Due to its overall construction, the N.K.1 is both capable of offense, through very effective slashing strikes, and useful for minute precision work. The included, rapid- release Kydex sheath comes with a paracord strip for neck carry. Further, it can be attached via MOLLE system to tactical vests or to any of the compatible cordura sheaths from Extrema Ratio. Available but not included: BELT-CLIP (for attaching sheath to a belt), polymer UNDER SHIRT SYSTEM (for concealed carry).
The JUHL is a general purpose utility hook make of super tough nylon. It is great for attaching keys, caps, gloves, or a water bottle. The slot fits 1" / 25 mm webbing. JUHL stands for J Utility Hook Large and is pronounced "jewel" NOT TO BE USED FOR CLIMBING OR LIFE-SAVING. - Patent Pending - General purpose utility hook - Made of super tough nylon - Great for attaching keys, cap, gloves, or a -water bottle - Slot fits 1” / 25 mm webbing - Not to be used for climbing or life-saving - Sold in package of four (4) Overall size: 3.2 x 2.0 x 6.4 cm
Incorporates a simple flow restrictor device. As supplied with your new Daystate. Suits Quick Coupler Plug, High Pressure Fill Valve, Daystate , Benjamin, Brocock, Crosman, Logun Eagle, PCR1, Ripley most HPA Paintball & Air Soft Tank side fill nipples & other compatible fill couplers. 1/8″ BSP Male Thread, suits most pump and cylinder fill lines Safe for use on all pre-charged equipment up to and including 300BAR, 4500psi Max Working Pressure 300BAR, 4500psi Compatible with Foster 12FS, 12FSS and 12MS Straight Thru Quick Snap Couplers Can be used with Tawnado Smart Coupling Kits
This special edition of 250 pieces, designed for the 25th anniversary of the brand, maintains the shape of the original knife but with up-to-date materials and finishing. K1 has a modified spear point blade, whose tip is a combination of tanto style at 40° and a more traditional European style, resulting in a very sharp but solid hybrid. It also has a sharp false edge that makes it very effective at thrusting. It has a high bevel that allows a very efficient cutting edge. The blade can be recognized for its hole on the blade, which makes the knife significantly lighter without compromising its sturdiness. It is made of Böhler N690, heat treated at 58 HRC, to reach the best combination of edge retention and resistance. It has a satin finish and a flat grind. The Anticorodal anodized handle has a lighter design compared to its original – a design that characterises Extrema Ratio knives – but it keeps the arched shape and the lateral “bump” of the K1, allowing an excellent grip in bot saber and reverse mode. The bottom part of the handle is curved to create a sort of hook for easily and rapidly pulling the knife out of the sheath, whereas the pommel stick out as a triangular glass breaker that can become a lanyard hole. The leather sheath is the exact replica of the original, retaining its features of rapid and easy extraction. The knife can be carried upwards underarm, horizontally with a belt or tactically in the leg. K1 comes with a Polypropylene case, a complete leather sheath and a shoulder strap to carry the knife underarm.
Even the "entry-level" model of the new Mark II generation of professional Rollei Rock Solid outdoor and travel tripods already carries an astonishing 20 kg payload. In addition to increasing the load capacity, the current Rock Solid models feature even easier operation and a number of other detail improvements. Extremely high loading capacity and a maximum of stability Can be turned into a monopod Rotatable center column and short center column for taking pictures near the ground (Macro) Quickly adjust the height thanks to smooth-running leg locks Mounting plate with 3/8” and 1/4“ screw 3/8“ and 1/4“ thread in the tripod shoulder to attach additional accessory Spirit levels in the tripod shoulder and the ball head for a precise adjustment Screwable spikes for a secure grip on every ground\n\n
Water-soluble, removable, mechanical all-surface marker TRADES-MARKER® WS is a refillable, all-surface marker that leaves a removable mark and is safe for all surfaces. Marks can be wiped away easily with water. Automotive and other transportation. Quality control. Glass industry. Metal fabrication Glass. Plastic. Stone. Non-porous surfaces. Steel and iron. Tile. Ceramic Great for many surfaces including: smooth, rough, rusty, or dirty surfaces. Marks are rub- and weather-resistant, leaving a bold, permanent mark. Marker refills eliminate mess and paper waste of grease pencils, saving time and money. Holder maximizes complete use of marker. Durable plastic holder helps prevent breakage and keeps hands and clothing clean. Push-button advancing makes for easy, one-handed use.. Convenient clip allows for pocket storage and prevents rolling off work table. Multiple colors available for easy identification..\n\n
Water-soluble, removable, mechanical all-surface marker TRADES-MARKER® WS is a refillable, all-surface marker that leaves a removable mark and is safe for all surfaces. Marks can be wiped away easily with water. Automotive and other transportation. Quality control. Glass industry. Metal fabrication Glass. Plastic. Stone. Non-porous surfaces. Steel and iron. Tile. Ceramic Great for many surfaces including: smooth, rough, rusty, or dirty surfaces. Marks are rub- and weather-resistant, leaving a bold, permanent mark. Marker refills eliminate mess and paper waste of grease pencils, saving time and money. Holder maximizes complete use of marker. Durable plastic holder helps prevent breakage and keeps hands and clothing clean. Push-button advancing makes for easy, one-handed use.. Convenient clip allows for pocket storage and prevents rolling off work table. Multiple colors available for easy identification.\n\n
Water-soluble, removable, mechanical all-surface marker TRADES-MARKER® WS is a refillable, all-surface marker that leaves a removable mark and is safe for all surfaces. Marks can be wiped away easily with water. Automotive and other transportation. Quality control. Glass industry. Metal fabrication Glass. Plastic. Stone. Non-porous surfaces. Steel and iron. Tile. Ceramic Great for many surfaces including: smooth, rough, rusty, or dirty surfaces. Marks are rub- and weather-resistant, leaving a bold, permanent mark. Marker refills eliminate mess and paper waste of grease pencils, saving time and money. Holder maximizes complete use of marker. Durable plastic holder helps prevent breakage and keeps hands and clothing clean. Push-button advancing makes for easy, one-handed use.. Convenient clip allows for pocket storage and prevents rolling off work table. Multiple colors available for easy identification.\n\n
HP Regulator 4500 psi Ninja PRO V3 Aluminum SHP, black / red The Ninja Pro V3 SHP was designed specifically for the Tippmann markers running RTs and Cyclone Feeds as well as Automags. SHP stands for Super High Pressure and it ships at a fixed output pressure of around 1100psi and is ideal to unleash the full potential of markers like the automag. With over 20 years of experience, Ninja Paintball is the leader in developing innovative and high quality paintball regulators. The Pro V3 is no exception and sets new standards. The main feature is the newly developed pin-valve, which allows the highest airflow of all regulators manufactured by Ninja so far. Increased airflow, also referred to as "flow", results in less velocity fluctuation and more consitancy. The Bonnet (the top element with threads) has also been redesigned. Unlike previous Pro V models, the thread on the V3 is a separate component that is responsible for the rotation of the regulator. By being able to rotate the thread, you can adjust where the fill nipple and pressure gauge " sits" on the fully installed regulator with millimeter precision. This prevents the two components from pressing into the hand when holding the marker, regardless of the thread and the size of the hand. To do this, once the HP system is fully discharged, simply loosen three locking screws and the HP system can then be adjusted accordingly on the marker. Instead of having to replace the entire bonnet in the event of damage, it is now possible to replace just that part. This is more sustainable and cost effective. In addition, it is possible to replace the aluminum thread with a stainless steel thread. The new OFV filling nipple is also worth mentioning. Instead of Teflon tape for sealing, a robust O-ring is used now. It simplifies cleaning and maintenance, as the O-ring can be quickly cleaned or replaced. In addition, this provides a cleaner appearance as there is no longer any ugly protrusion of Teflon tape. Topping off all this, the Pro V3 comes with a large set of spare parts. It includes various gaskets, small parts, screws and even a matching Allen wrench. Super High Pressure Regulator with around 1100 Psi fixed output pressure 360° rotable when depressurized Newly designed bonnet with interchangeable thread Newly developed Pin-Valve with highest flow of all Ninja Regs so far Generous spare parts kit with gaskets, small parts, screws and hex key High quality and precise workmanship
HP Regulator 4500 psi Ninja PRO V3 Aluminum SLP, black / red SLP in the name of this Pro V3 stands for Super Low Pressure. The output pressure is fixed at 300 Psi and not suitable for every marker. It is best to find out beforehand whether your marker works with an output pressure of 300 Psi. With over 20 years of experience, Ninja Paintball is the leader in developing innovative and high quality paintball regulators. The Pro V3 is no exception and sets new standards. The main feature is the newly developed pin-valve, which allows the highest airflow of all regulators manufactured by Ninja so far. Increased airflow, also referred to as "flow", results in less velocity fluctuation and more consitancy. The Bonnet (the top element with threads) has also been redesigned. Unlike previous Pro V models, the thread on the V3 is a separate component that is responsible for the rotation of the regulator. By being able to rotate the thread, you can adjust where the fill nipple and pressure gauge " sits" on the fully installed regulator with millimeter precision. This prevents the two components from pressing into the hand when holding the marker, regardless of the thread and the size of the hand. To do this, once the HP system is fully discharged, simply loosen three locking screws and the HP system can then be adjusted accordingly on the marker. Instead of having to replace the entire bonnet in the event of damage, it is now possible to replace just that part. This is more sustainable and cost effective. In addition, it is possible to replace the aluminum thread with a stainless steel thread. The new OFV filling nipple is also worth mentioning. Instead of Teflon tape for sealing, a robust O-ring is used now. It simplifies cleaning and maintenance, as the O-ring can be quickly cleaned or replaced. In addition, this provides a cleaner appearance as there is no longer any ugly protrusion of Teflon tape. Topping off all this, the Pro V3 comes with a large set of spare parts. It includes various gaskets, small parts, screws and even a matching Allen wrench. Super Low Pressure Regulator with fixed 300 Psi output pressure 360° rotable when depressurized Newly designed bonnet with interchangeable thread Newly developed Pin-Valve with highest flow of all Ninja Regs so far Generous spare parts kit with gaskets, small parts, screws and hex key High quality and precise workmanship
Antiquated plate carriers are clunky, cumbersome and tougher to ditch than a summons server. The patented 5.11® Sierra Bravo™ Slide quick-release buckle on our QR Plate Carrier makes donning and doffing fast, effortless and contortion-free. Constructed from high-strength TAC-LAM® laminate with laser-cut MOLLE, it's adaptable and built for years of service. The low-profile Hypalon shoulder straps with removable padded shoulder shrouds keep things streamlined without sacrificing comfort. Padded body panels are stretch woven to ensure breathability and comfort, while the rear MOLLE platform is compatible with the AMPC Pack and PC Convertible Hydration Carrier. Cord can be routed through eyelets at the bottom to prevent hang-ups. Front and rear loop panels are ideal for agency ID. Add side protection with optional Side Plate Pouches. Patented Sierra Bravo™ Slide quick release buckle for easy on/off High strength TAC-LAM® laminate laser-cut MOLLE Vertical laser-cut holes for Gear Set® or Quik Attach platforms Low profile Hypalon® shoulder straps with removable padded shoulder shrouds. Semi-rigid laser-cut cummerbund with adjustable rear hook/loop system Rear platform is AMPC Pack and PC Convertible Hydration Carrier compatible Add side protection with optional Side Plate Pouches Internal plate retention strap with hook/loop closure flap Padded body panels with stretch woven for breathability and comfort Grab drag handle with full length strap construction Expand your gear capacity with 5.11® pouches Bottom eyelets for routing cord Front and rear loop panels for agency ID 500D Nylon (main body) Hypalon® (shoulder straps) TAC-LAM™ High Strength Nylon Laminate
Antiquated plate carriers are clunky, cumbersome and tougher to ditch than a summons server. The patented 5.11® Sierra Bravo™ Slide quick-release buckle on our QR Plate Carrier makes donning and doffing fast, effortless and contortion-free. Constructed from high-strength TAC-LAM® laminate with laser-cut MOLLE, it's adaptable and built for years of service. The low-profile Hypalon shoulder straps with removable padded shoulder shrouds keep things streamlined without sacrificing comfort. Padded body panels are stretch woven to ensure breathability and comfort, while the rear MOLLE platform is compatible with the AMPC Pack and PC Convertible Hydration Carrier. Cord can be routed through eyelets at the bottom to prevent hang-ups. Front and rear loop panels are ideal for agency ID. Add side protection with optional Side Plate Pouches. Patented Sierra Bravo™ Slide quick release buckle for easy on/off High strength TAC-LAM® laminate laser-cut MOLLE Vertical laser-cut holes for Gear Set® or Quik Attach platforms Low profile Hypalon® shoulder straps with removable padded shoulder shrouds. Semi-rigid laser-cut cummerbund with adjustable rear hook/loop system Rear platform is AMPC Pack and PC Convertible Hydration Carrier compatible Add side protection with optional Side Plate Pouches Internal plate retention strap with hook/loop closure flap Padded body panels with stretch woven for breathability and comfort Grab drag handle with full length strap construction Expand your gear capacity with 5.11® pouches Bottom eyelets for routing cord Front and rear loop panels for agency ID 500D Nylon (main body) Hypalon® (shoulder straps) TAC-LAM™ High Strength Nylon Laminate
![Art of Guillaume de Mach [Import Allemand]](https://m.media-amazon.com/images/I/51Vtpg8nmFL._SL160_.jpg)
